⅓ & ¾ Hp Pumps
⅓ & ¾ Hp Pumps
FE PETRO® ⅓ & ¾ Hp fixed speed submersible pumps deliver consistent flow rates for low throughput fuels.
WE SET THE STANDARD
FE PETRO® brand submersible pumping systems set the standard by which all other fuel pumping systems are measured. With best-in-class flow rates and backed by a long history of dependability, FE PETRO® pumps are responsible for delivering fuel to thousands of customers around the globe, day in and day out.
Advanced Protection
Stop corrosion in its tracks. Special powder-coated, e-coated, and stainless steel components defend your pump and the entire fuel system from accelerated corrosion.
Intake Filter Screen
Avoid system damage, pumping slowdowns, and reduce filter changes by keeping harmful tank debris, sediment, and corrosion from entering your pumping system.
Fuel Compatiblity
FE PETRO® pumps are UL listed with both UL79A (up to 85% ethanol) and UL79B (up to 20% or 100% Biodiesel).
Turbine Pump Interface
Remote enhanced pump monitoring and control including pump-in-water automation, clogged intake escalation, tank leveling, and tank priority.
Variable Length
Be prepared for whatever the jobsite throws at you. Our patented telescoping pump shafts let you adjust onsite for that perfect fit.
Available as an option on AG compatible submersible turbine pumps, Advanced Protection defends STPs from accelerated corrosion caused by the acedic byproduct of microbial activity.
Turbine Pump Interface is a powerful tool that creates a network between your FE PETRO® STP controllers and EVO™ Series ATGs. Through TPI, the tank gauge can be programmed to respond to faults in the submersible pumping system and react with intelligence that pump controllers alone cannot.
SEE TPI IN ACTIONPump In Water Automation
When the water level in a tank approaches the pump intake, the tank gauge will enter alarm mode and automatically shut down the pump, protecting the system and con
Leveling & Priority Modes
When managing two storage tanks of the same product ‘Leveling Mode’ can keep both tanks at the same percentage full without the use of a syphon bar between the two tanks.
Remote Pump Interaction
By networking the intelligent controllers to the fuel management system via TPI, a technician can remotely connect to the site to review the logged event history and view the status.
An Intake Filter Screen (IFS) provides fuel filtration for the entire system down to about the size of a grain of sand (0.009” openings). It’s designed to keep harmful debris, sediment, and tank corrosion from entering the pumping system and creating service events including dispenser filter changes.
Intake Filter Screens
4" Submersible Pump Components & Key Dimensions
1. Manhole
2. Leak Detector
3. Manifold
4. Containment Sump
5. 4" Riser
6. Tank Adapter
7. Tank Manway
8. Column Pipe
9. Variable Length Coupler
10. Pump Motor Assembly (PMA)
11. End bell
12. Line Test Port, ¼" NPT
13. Leak Detector Port, 2" NPT
14. Syphon Port, ¼" NPT
15. Tank Port, ¼" NPT
16. Riser Pipe, 4" NPT
17. Discharge Outlet, 2" NPT
Notes:
1. Effective tank diameter (ETD) = Inside tank diameter (to top of 4" bung), including tank manway and/or sump adapter.
2. Model length (A) = ETD plus riser length minus bottom clearance minus 1" thread engagement.
3. Riser length (B) = Bury depth (to top of tank) minus pump head clearance minus tank manway and/or minus sump adapter.
Optional Features
Biofuel Compatibility
FE PETRO® pumps are UL listed with both UL79A (up to 85% Ethanol) and UL79B (up to 20% or 100% Biodiesel).
Variable Length
The patented telescoping pump shaft lets installers adjust the length of the pump onsite for the perfect fit.
Advanced Protection
Stop corrosion in its tracks. Special powder-coated, e-coated, and stainless steel components defend your pump in the tank and in the sump from accelerated corrosion.
Turbine Pump Interface
Remote enhanced pump monitoring and control including pump-in-water automation, clogged intake escalation, tank leveling, and tank priority.
Intake Filter Screen
Avoid system damage, pumping slowdowns, and reduce filter changes by keeping harmful tank debris, sediment, and corrosion from entering the pumping system with this factory-installed option.
Standard Features
Active Air Eliminator
FE PETRO® STPs come standard with active air elimination, which eliminates air through the highest point in the pump head at all times when the pump is running, assuring air does not pass into discharge piping.
Safety and Ease of Maintenance
FE PETRO® STPs include a contractor electrical disconnect, which requires loosening only one bolt, allowing motor wiring to be disconnected without venting the dangerous tank vapors into the sump when servicing FE PETRO® submersible products.
Simple Servicing
If ever required, the pump can be easily removed from the tank by unthreading three bolts. There is no need to disconnect the syphon system or to remove the leak detector from the system to service the STP.
Manual Pressure Relief
As a standard FE PETRO® feature, a vent screw is provided to bleed line pressure to zero when necessary. By turning this screw, product is diverted back to the tank, dropping line pressure to zero. This reduces fuel discharged into the sump manhole or dispenser pan during servicing, further protecting service technicians and the environment.
Outlast, Outperform with Franklin Electric Inside
FE PETRO® STPs are powered by the legendary Franklin Electric motor and built for long term performance. Franklin Electric-powered submersible pumps provide maximum uptime and a proven track record in the fueling industry that spans more than four decades. They feature best-in-class flow rates and a long history of dependability.
Quality Certification
Franklin Fueling Systems is an ISO 9001 Certified Manufacturer.
General
- ⅓ and ¾ Hp fixed speed models are available in variable length and fixed length options.
- Check valve: 2¾" diameter fluorocarbon seal constructed with cast aluminum body and steel backing washer.
- Pressure relief valve: available in four pressure relief settings, integral to check valve. Standard model relieves at 40 psi and resets above 35 psi.
- Syphon: venturi-type syphon primer supplied with every submersible. Syphon check valve and secondary syphon sold separately.
- Air eliminator: every submersible includes a tank return path with one-way check valve to provide active air elimination.
- Electrical disconnect: electrical yoke for positive contractor disconnect during service.
Pump Motor
- ⅓ and ¾ Hp fixed speed, 3450 rpm, two-stage centrifugal type pump motor with integral, automatic thermal overload protection.
- ⅓ Hp models have a max. pressure of 27 psi.
- ¾ Hp models have a max. pressure of 30 psi.
Power Requirements
- ⅓ and ¾ Hp fixed speed models require single-phase, 208-230 VAC, 60 Hz incoming power.
- ⅓ and ¾ Hp fixed speed models incorporate a starting and running capacitor, with internal bleed resistor, rated 370 Volt, 15 microfarad.
- STP-SCI single-phase Smart Controllers and STP-CBS single-phase control boxes are available for ⅓ and ¾ hp pump control.
- ⅓ hp max. motor draw: 4 Amps.
- ¾ hp max. motor draw: 7 Amps.
Liquid Compatibility
- Max. liquid viscosity: 70 SSU at 60 °F (15 °C).
- Standard STP models are UL and cUL listed for fuel mixtures containing up to 10% ethanol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
- STPAG/STPAP (AG compatible) models are UL listed for fuel mixtures containing diesel fuel with up to 20% Biodiesel, 100% Biodiesel, up to 85% ethanol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
- ⅓ and ¾ hp fixed speed models can also be used with diesel fuels, fuel oils, kerosene, Avgas, and jet fuels in a non-gelled pourable state.
- All wetted elastomers are made of a high grade, fluorocarbon compound.
Approvals
- cULus listed.
- Consult factory for applicable approvals.
⅓ Hp Fixed Speed Pump Performance Chart
¾ Hp Fixed Speed Pump Performance Chart
⅓ & ¾ Hp Fixed Speed Submersible Pump Ordering Guide
A typical turbine model designation has up to five components to define the pump being supplied as follows:
STP XXXXX Y - A - B
STP = Basic Model Designation
XXXXX = Factory Installed Options (Model designations may include one or more of the following characters in alphabetical order.)
AP = Advanced Protection with powder-coated, e-coated, and stainless steel components, alcohol-gasoline compatible (up to E85, up to B20, and B100) (Note standard models up to 10% ethanol capable)
AG = Alcohol-gasoline compatible (up to E85, up to B20, and B100) (Note standard models up to 10% ethanol capable)
F = Floating suction adapter (1½" NPT female adapter)
K = Intake filter screen (IFS, factory installed to PMA)
*R = Model R check valve (24 psi relief / 22 psi reset for PLLD)
*W = Model W check valve (16 psi relief / 13 psi reset for PPM4000)
Y = Pump Motor Horsepower Rating
33 = ⅓ Hp fixed speed
75 = ¾ Hp fixed speed
A = Model Length
VL1 = Variable length range #1. (⅓: 55" - 83", ¾: 57" - 86")
VL2 = Variable length range #2. (⅓: 86" - 147", ¾: 88" - 149")
VL3 = Variable length range #3. (⅓: 118" - 209", ¾: 120" - 212")
(Note VL2 models fit 94% of all known installations)
B = Riser Pipe Length (see diagram)
Riser pipe length is expressed as two numeric characters that indicate the total length of the riser in inches. Riser pipes are available from 7" to 60" in 1" increments (additional charge for risers 31" or longer).
Notes: *If not otherwise specified, all STP models are supplied with standard model check valve (40 psi relief / 35 psi reset for MLD, TS-LS300, and TS-LS500).
⅓ & ¾ Hp fixed speed specific accessories - 60Hz
| Item Number | Long Description |
|---|---|
| 400137908 | Syphon check valve, alcohol-gasoline compatible (when ordered with STP/IST) |
| 400818921 | STP-CBS, single-phase control box, with switch and lockout, 120 Volt coil |
| 402312931 | STP-DHI + SPGC-220 Guardian Series™ Single-Phase Controller bundle (220 Volt supply, 110 Volt hook) |
| 402313921 | STP-DHI-CBS, combo DHI with factory-wired STP-CBS single-phase control box |
| 402459931 | Model 65 PSI (4.5 bar) relief check valve (AG compatible for slave of manifolded STPs with Veeder Root™ PLLD) |
| 402507930 | Secondary syphon kit (when two syphon primes are required for one STP or IST) |
| 5800100220 | SPGC-220 Guardian Series™ Single-Phase Controller, 220 Volt |
| 5800300100 | STP-DHI, dispenser hook isolation for 110 Volt dispenser handle switches, up to eight each |
¾ Hp fixed speed specific accessories - 50Hz
| Item Number | Long Description |
|---|---|
| 400137937 | Syphon check valve, alcohol-gasoline compatible |
| 400818922 | STP-CBBS, single-phase control box, with switch and lockout, 240 Volt coil |
| 401220965 | STP-CBB3C, three-phase 380-415 VAC magnetic starter |
| 402312932 | STP-DHIB + SPGC-220 Guardian Series™ Single-Phase Controller bundle (220 Volt supply, 240 Volt hook) |
| 402313922 | STP-DHIB-CBBS, combo DHI with factory-wired STP-CBBS single-phase control box |
| 402459931 | Model 65 PSI (4.5 bar) relief check valve (AG compatible for slave of manifolded STPs with Veeder Root™ PLLD) |
| 402507930 | Secondary syphon kit (when two syphon primes are required for one STP or IST) |
| 5800100220 | SPGC-220 Guardian Series™ Single-Phase Controller, 220 Volt |
| 5800300200 | STP-DHIB, dispenser hook isolation for 240 Volt dispenser handle switches, up to eight each |
| 5800103300 | STP-SCIIIC, three phase 380-415 VAC smart controller |
Featured
Brochures
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0796 Submersible Turbine Pumps Datasheet.pdf | 4.84 MB | |
 |
FFS-0383 (50 Hz) 3_4 Hp Fixed Speed STP Datasheet.pdf | 2.11 MB |
Catalogs
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0216 (UL) FFS Product Catalog.pdf | 20.25 MB | |
 |
FFS-0219 (EN) Submersible Systems Catalogue.pdf | 4.67 MB |
Manuals
| Title | Type | Size | |
|---|---|---|---|
 |
400604005 STP-IST Installation Guide.pdf | 2.76 MB | |
 |
400289002 PMA Replacement Guide.pdf | 1.23 MB |