At a fraction of the weight of typical steel access covers, a single technician can easily remove the lightweight FLEX-ING™ composite manways.
The vapor swivel adapter helps prevent leaks caused by constant delivery elbow movement on the riser adapter. The top section rotates during normal deliveries, preventing the bottom section from loosening on the riser pipe which could cause a vapor or product leak around the adapter. It’s poppet design seals off the vapor path when not coupled.
APT® secondary test boots are designed for testing the integrity of secondary contained flexible piping when using APT® clamshell fittings. Each boot has an air chuck for applying air pressure to the secondary containment jacket. Placing a boot on each end of the secondary containment jacket forms an airtight chamber for testing. After the testing is completed, slide the boots back on the pipe to open the secondary system. The boots remain on the pipe available for future testing as required by local regulations.
FLEX-ING™ brand 1½" diesel exhaust fluid shear valves shut off the flow of DEF/AdBlue® in the event of a vehicle collision with a dispenser preventing an excessive and uncontrolled release into the environment. The optional e-coated mounting bracket allows installation both in containment sumps beneath the dispenser as well as direct mounting to the concrete forecourt.
APT™ brand water-resistant tank sumps feature a water-resistant, gasketed lid with integrated hold-down toggles to prevent liquid from entering into the tank sump. Four lid toggles provide compression between the lid gasket and the riser without the need for any penetrations - eliminating potential leak paths.
One vacuum pump per dispenser supplies both sides, reducing long term maintenance costs. The VP1000 has been designed to satisfy the vapor recovery needs of a blender or non-blender dispenser. Simple installation with no excavation minimizes downtime and labor. The VP1000 connects to the dispenser with a simple interface module without costly software changes or electronic board replacement. This is the most cost-effective dispenser-mounted vacuum-assist system on the market today.
As part of the CableTight™ Wire Management System, the Direct Bury System is ideal for applications where cables of 5 mm to 16 mm diameter are directly buried in the ground (such as grounding wires and armored power cables).
The fill swivel adapter helps prevent leaks caused by constant fill delivery elbow movement on the riser adapter. The top section rotates during normal deliveries, preventing the bottom section from loosening on the riser pipe which could cause a vapor or product leak around the adapter.
The secondary containment monitoring (SCM) system detects leaks in double-wall piping, tanks, and containment sumps. The system utilizes the siphon/vacuum port of a submersible turbine pump to draw a vacuum on these interstitial spaces. The vacuum levels are then continuously monitored to detect any potential leaks in these double-wall containments.
The Surge Management System provides surge protection for dispensers as well as multiple types of common electronic circuits in one, consolidated enclosure.